直线模拟加载系统的研究进展与发展趋势

直线模拟加载系统是一种用于在实验室条件下模拟承载对象工作时所受直线负载力的半实物仿真系统，可用于模拟各类飞行器关键部件在工作过程中所受的气体阻力载荷。针对目前常用的机械式、电液式和电动式直线模拟加载系统，分析其基本加载原理和研究进展，结合自行研制的电动式直线模拟加载系统进行了深入探讨。针对多余力抑制方法的关键问题，详细论述了直线负载模拟器的结构补偿方法和控制策略。最后，展望了直线模拟加载系统的发展趋势，归纳了电动式直线模拟加载系统的高精度、大载荷发展方向。     

Fully distributed time-varying formation tracking control for multiple quadrotor vehicles via finite-time convergent extended state observer

This paper investigates a time-varying anti-disturbance formation problem for a group of quadrotor aircrafts with time-varying uncertainties and a directed interaction topology. A novel Finite-Time Convergent Extended State Observer (FTCESO) based fully-distributed formation control scheme is proposed to enhance the disturbance rejection and the formation tracking performances for networked quadrotors. By adopting the hierarchical control strategy, the multi-quadrotor system is separated into two subsystems: the outer-loop cooperative subsystem and the inner-loop attitude subsystem. In the outer-loop subsystem, with the estimation of disturbing forces and uncertain dynamics from FTCESOs, an adaptive consensus theory based cooperative controller is exploited to ensure the multiple quadrotors form and maintain a time-varying pattern relying only on the positions of the neighboring aircrafts. In the inner-loop subsystem, the desired attitude generated by the cooperative control law is stably tracked under a FTCESO-based attitude controller in a finite time. Based on a detailed algorithm to specify the cooperative control protocol, the feasibility condition to achieve the time-varying anti-disturbance formation tracking is derived and the rigorous analysis of the whole closed-loop multi-quadrotor system is given. Some numerical examples are conducted to intuitively demonstrate the effectiveness and the improvements of the proposed control framework.     

椭圆振动切削加工的同步控制研究

利用椭圆振动切削加工的回转体表面微织构是在机床主轴旋转、平台进给和装置椭圆振动的联合运动下得到的,机床主轴转动与装置位移输出如果不能保持完全的实时同步,会造成微织构加工的偏差。为了解决这一问题,提出了一种新的基于转角的同步控制方法,该方法在主轴的对位基准处实现装置正弦信号的复位,以修正转速漂移造成的加工位置误差,并通过判断主轴角度信号实时输出对应幅值电压来实时同步信号输出和机床旋转运动。基于LabVIEW FPGA搭建同步控制模块,经试验验证,利用该方法加工的矩形阵列微织构轴向排列与中轴线平行,与周向排列的夹角和仿真结果的偏差不超过0.1°,织构深度随转角的不同发生预设的变化,因此,同步控制方法具有实时同步控制椭圆振动切削装置的能力。     

考虑捷联导引头最小视场角约束的制导策略

针对高超声速飞行器捷联导引头，提出导引头最小视场角（FOV）约束问题。首先分析了导引头视线角变化规律，指出在攻击固定目标时，导引头最小视场角约束在弹道末段无法被满足，导引头将丢失目标。在此基础上，基于缩短导引头丢失目标距离的目标，提出一种满足导引头最小视场角约束的制导策略。该策略不依赖于末制导律形式，当最小视场角约束无法被满足时，改变原有制导指令，主动改变弹道轨迹以增加弹体视线角，避免超出视场范围。其次，针对飞行器过载约束，设计了制导策略切换点，在到达切换点时该制导策略将结束工作，避免末端过载过大超出约束。通过对比仿真验证了所提出制导策略有效性，能够大幅度减少导引头丢失目标距离，工程上有利于提高末端命中精度。     

对于动态目标的航天器鲁棒PD+快速跟踪控制方法

摘要：针对卫星对于空间动态目标快速、稳定地跟踪、控制目标，同时考虑平台模型的不确定性、外部随机干扰、系统控制力矩与角速度约束等因素，设计PD+控制器实现对于动态目标的快速、稳定跟踪；在经典PD控制器的基础上设计控制添加项使得系统能够按照既定轨迹运动；采用变结构的手段实现系统收敛速度的提升；合理设计Lyapunov函数的结构，引出角速度、四元数的耦合项对V函数进行改良，简化系统稳定性证明与分析的过程；讨论系统最极端情形，通过对V函数上下界的讨论分析系统该情形下的稳定性；最后通过数值仿真验证所提出算法的有效性与优越性.     

基于变马赫数的五孔探针三维插值方法

探讨了五孔探针气动数据的插值方法,为提高插值精度,开发了基于传统线性插值法的三维线性插值法。该方法把同一探针在不同马赫数下的校准图形成三维数据库,将实验数据通过三维图进行插值。并使用改进前后的两种插值方法分别对校准风洞测得的数据进行整理,对比结果证明:在实验工况连续变化的情况下,三维线性插值法在插值精度上要优于传统线性插值法。特别是在来流马赫数变化较大时,该方法可以改善单一校准文件处理造成的数据精度问题,可用于自动化流场采集系统,为流场高速高精度采集奠定基础。     

超精密微牛级微波离子推进技术及其在卫星超精度控制中的应用研究

空间技术的快速发展使得利用空间卫星的编队飞行构建大型空间星座成为可能，在引力波探测、射电望远镜编队、星座组网等任务方面具有重要作用。超精度控制是实现卫星高精度编队飞行的关键技术。推进系统是实现卫星编队长期高度稳定飞行的保证，从而实现内部科学装置的正确运行。不同于常规的推进系统，卫星精密编队超精度控制对推进系统的推力可调范围、分辨率、响应时间、推力的一致性等有着极高的要求。根据卫星精密编队任务需求，对微牛级推进系统的功能及技术要求进行了分析，提出了基于M2微波离子推力器的卫星超精度控制推进系统。阐述了M2超精密微牛级推进系统的关键技术和研究进展，为后续M2推力器在无拖曳控制方面的应用奠定了基础。     

带攻角约束的高超声速飞行器自适应反步控制器设计

针对带攻角(AOA)约束的高超声速飞行器控制问题，提出一种基于非对称时变障碍函数的非线性自适应反步控制方法。首先，将飞行器模型化为严反馈形式，以反步法为基础进行控制器设计。然后通过光滑饱和函数对名义攻角指令信号进行限幅，并保证限幅信号的可导性，限幅产生的误差通过设计辅助系统进行补偿。进而使用障碍函数对攻角指令跟踪误差进行非对称时变约束。针对不确定性和干扰，设计新型自适应律对集中干扰上界进行估计并补偿。最终通过Lyapunov理论证明了闭环系统状态量一致最终有界并且攻角始终满足时变约束。仿真结果表明，本文方法能够在满足攻角约束基础上保证良好跟踪性能。     

Event-triggered attitude control of spacecraft

The problem of spacecraft attitude stabilization control system with limited communication and external disturbances is investigated based on an event-triggered control scheme. In the proposed scheme, information of attitude and control torque only need to be transmitted at some discrete triggered times when a defined measurement error exceeds a state-dependent threshold. The proposed control scheme not only guarantees that spacecraft attitude control errors converge toward a small invariant set containing the origin, but also ensures that there is no accumulation of triggering instants. The performance of the proposed control scheme is demonstrated through numerical simulation.     

多机并联火箭羽流流场及其底部热环境分析

For the problem that the plume flow field structure of a multi engine parallel rocket is complicated and the bottom thermal environment is extremely harsh, which may cause the failure of the engine structural components, the plume flow field and thermal environment at different altitudes are studied through numerical simulation. The result is compared with the measured results in flight which shows that when the rocket is flying at a low altitude, the plume of the engines do not interfere with each other. As the flight altitude increases, the plumes gradually expand and begin to interfere with each other, and finally there is an obvious backflow at the bottom of the rocket. The maximum heat flux at the moment of take off is basically the same as the measured value in flight. Before the backflow occurs, the heat flux mainly consists of radiant heat, the convective heat flow increases as the flight altitude grows, but it is also much smaller than the peak heat flow at takeoff. The result has certain guiding significance for the optimal design of engine structure thermal protection.